|
Description |
Part Number |
|
|
Gas Burners and all burner Repair parts Original Equipment
specified on Stingray Parts Washers
|
71650 |
|
Riello 40 Gas Burner Controller module
for Stingray Parts Washer.
|
53368
|
|
Gas Burner Combination valve
for StingRay Parts Washer
Please call and specify gas valve brand |
Call
|
|
Gas Burner Flame sensing rod
Stingray OEM replacement part.
Please call and specify gas burner brand |
Call
|
|
Gas Pressure Regulator for Gas Burners. All sizes and ranges available for new installations to regulate pressure to appropriate amount for gas burner installation. 7 PSI to 12 wci.
Specify pressure & flow rate or gas burner size.
OEM replacement
parts for Stingray parts washers. |
Call |
|
Heating Elements
Stingray Parts Washer.
Specify Voltage and Kilowatts required.
OEM replacement
parts for Stingray Parts Washer equipment.
Screw Plug Immersion Heating Elements for direct heating of washing solutions. The element materials and watt density is specifically designed for use in the highly alkaline and oily grease laden solution of the Parts Washer. Other types of element materials and those with higher power densities can fail prematurely. Includes Moisture Resistant NEMA 12 terminal enclosure with gasketed cover. Standard NPT 2 1/2 inch screw plug configuration. Watt density rated for Parts Washing solution with highly corrosion resistant sheath.
208, 240, 380, 460 VAC
7.5 kW, 15 kW,and 20 kW size parts in stock.
|
52369 |
|
208V |
|
2kW |
52370 |
|
208V |
|
7.5kW |
52371 |
|
208V |
|
15kW |
52372 |
|
208V |
|
20kW |
52373 |
|
240V |
|
2kW |
52374 |
|
240V |
|
7.5kW |
52375 |
|
240V |
|
15kW |
52376 |
|
240V |
|
20kW |
52377 |
|
480V |
|
2kW |
52378 |
|
480V |
|
7.5kW |
52379 |
|
480V |
|
15kW |
52380 |
|
480V |
|
20kW |
|
|
Temperature Gage and thermometer.
Measures temperature of the wash solution. Calibrated in 2 degree increments with maximum scale reading of 220 degrees F. Use part number 50498 for centigrade scale. |
|
|
Thermocouple Probe and housing
for standard Stingray Washer,
NEMA 12 Oil Tight
construction, Thermocouple type matched to temperature controller
in control panel
Stainless steel heavy
duty sheath |
|
|
Temperature Controller
StingRay Washer Heating System Electronic Temperature Controller, 0-300 Degree F for attachment to thermocouple. Plug in pins for socket base. |
22350 |
|
High-Temperature Sealant
This mica-based putty Bonds, Seals, and Fills. The non-flammable Adhesive & Sealant Putty withstands temperatures from -100 to +2350 F. Use for gas burner installation to seal flanges, mounting surfaces, flue exhaust systems, and furnace fire boxes. Resists most acids, solvents, and corrosives.
Starts to set-up in 20 minutes; with full cure in 24-48 hours. Gray color.
11-oz. cartridge for use in a standard caulk gun.
|
|
|
Steam Heat Exchanger Stingray parts Washer.
OEM replacement steam coil for Stingray Parts Washer steam heating System. Factory tested and inspected. Available in 14 gage Carbon Steel or Corrosion resistant 16 gage 304 Stainless Steel. Heavier gages available. Specify Height and Width (AxB) |
Call |
|
|
|
|
If you don't see what you need in this list, please
call or email us. We have everything you need for your StingRay Parts Washer.
|
| Back to Top | |