Spare/ Repair Parts
  • Maintenance
  Chemicals
  • Training
  • Titration
  Rebuilds / Retrofits
  Training / Start-Up
  Support
  FAQ
  Warranty Service
  Contact Us
  • Location
  • Feedback

PVC Pipe & PVC Fittings for Steam Exhaust

Steam Exhaust Installation Parts « Return to All Parts

For More information on ordering these parts, contact us.

PVC Pipe and Fittings for MART and StingRay Auto Steam Exhaust Installation.

PVC Parts Washer Steam Exhaust PVC thick wall pipe has proven to be the best solution for discharging the hot steam vapors from the MART Washer.  It is easy to cut and install. Unlike metal, PVC fittings never rust, scale, or pit, and will provide many years of maintenance-free service. Substantially lower material costs versus steel alloys or lined steel, combined with lighter weight and ease of installation, PVC pipe and fittings can reduce installation costs by as much as 60% over conventional metal systems. PVC is simple to bond together with silicone RTV adhesive. PVC fittings and PVC pipe have been used in hundreds of MART installations demonstrating its appropriateness for the vapor service temperatures seen in the MART Parts Washers.

 Exceptional Chemical & Corrosion Resistance                      Lower Installation Costs

6” Pipe & Fittings used for Cyclone 2.2
8” Pipe & Fittings used for Cyclone 30, Tornado 40, 52
10” diameter fittings used on Tornado 60, 72, Hurricane 72, 84, 100

Note: USA PVC Pipe Sch 40 equivalent sizes: OD = outer diameter
  8 inch Sch 40 OD=  8.625 in (219mm), Wall= .322 in (8.18mm)
10 inch Sch 40 OD= 10.75 in (273mm), Wall= .365 in (9.27mm)
12 inch Sch 40 OD= 12.75 in (324 mm), Wall= .375 in (9.53mm)

Part Number

Description

  

85120
85121
85122
85123
85124
85125

6” Pipe X 10 feet
6” Pipe X 20 feet
8” Pipe (8.625" OD x .322" wall) X 10 feet
8” Pipe (8.625" OD x .322" wall) X 20 feet
10” Pipe (10.75" OD x .365" wall) X 10 feet
10” Pipe (10.75" OD x .365" wall) X 20 feet

PVC Pipe 8" or 10"            

85126
85127
85128

45 deg Elbow 6” diameter
45 deg Elbow 8” diameter
45 deg Elbow 10” diameter
        

PVC 45 degree Elbow

85129
85130
85131

90 deg Elbow 6” diameter
90 deg Elbow 8” diameter
90 deg Elbow 10” diameter         

PVC 90 degree Elbow

85132
85133
85134

Coupling  6” diameter
Coupling  8” diameter
Coupling  10” diameter                            

PVC Pipe Coupling

69363
69033
69036

PVC Swivel Flange Kit:
Includes 3 Flanges, Gaskets, & Hardware
6” diameter Kit
8” diameter Kit
10” diameter Kit

PVC Swivel flange

51757
51758
51759

Rain Cap 6” diameter
Rain Cap 8” diameter
Rain Cap 10” diameter

PVC Rain Cap

85138

RTV Silicone Cement. Alkaline chemical & High temperature resistant.  11 oz Tube

RTV Silicone

50705

Twist Transition Steam Exhaust

Required when the ASE blower Motor needs to be rotated to align the shaft parallel to the ground. Connects between the blower and the motor. Gaskets provided.

Twist_transition

Call

ASE Conduit & Wiring Installation Kit . Everything you need to electrically connect the ASE blower including conduit, red, white & green ground wire, conduit fittings and wire nuts.
25 foot or 50 foot run. Specify length.

 


Home | Product Registration | Site Map
Spare/Repair Parts | Maintenance | Chemicals | Training | Titration | Rebuilds/Retrofits
Training/Startup | Support | FAQ | Warranty Service | Contact Us | Location | Feedback

MART Tech Services
2450 Adie Road, Suite 100
Maryland Heights, MO 63043

Phone: (314) 567-3705
Fax: (314) 567-6318
Toll Free: (800) 543-6278
Email: service@marttechservices.com