Parts Washer Chemicals - Specification Sheets - Power Kleen Rust Inhibitor



Power-Kleen RI

Corrosion Protection for Steel & Iron Parts

 

GENERAL DESCRIPTION

Power-Kleen RI Rust Inhibitor is a concentrated parts rinsing chemical for flash rusting and corrosion protection of Steel, Iron, and Yellow Metal Parts. Power Kleen RI is a liquid that is injected into the rinse water. Highly effective with all Power-Kleen detergents.

Power-Kleen RI Rust Inhibitor

ADVANTAGES

  • Protects parts from flash rusting immediately after drying

  • Provide short-term corrosion protection for storage

  • Concentrated for low usage and cost

  • No silicone to cause paint adhesion or fish eye problems

  • Does not require premixing

  • Low odor and does not cause staining

  • Does not inhibit or interfere with the cleaning process. Doesn’t affect the cleaning chemical, No reduction in Cleaning power of your chemistry

 

APPLICATION GUIDELINES

Power-Kleen Rust Inhibitor is designed for use at extremely low quantities:

  • Mix ratio: .5 oz to 1 oz per gallon.

  • Temperature 150 to 210ºF.  Recommend as hot as possible.

PHYSICAL PROPERTIES (TYPICAL DATA)

Form..............................................................Liquid           pH range of Working Solution.........................11.5
Color (concentrate) ......................................Yellow             pH of concentrate.......................................Neutral
Odor.................................................................Mild               

MIXING INSTRUCTIONS

The recommended use for MART Power Washers, heat the water to at least 160 degrees. Rust inhibitor may be added to the rinse through the chemical injector pump by placing the pump feed tube into the Rust inhibit or container. Make sure the amount of chemical metered into the rinse does not exceed 2/3 oz per gallon of water in reservoir. This chemical may also be sprayed on to the part after washing. Avoid contact with chemical and solution. Avoid inhaling dust and fumes. Operate the wash cycle at 160 to 190 degrees F. Instructions can also be found on the Power-Kleen Rust Inhibitor label, MTS Website or reference the MART Power Washer Operating Manual for mixing in the washer.

HEALTH AND SAFETY

Power-Kleen RI SDS

NOTES:

Part Number

Package Size

52837

5 gal Pail

52838

55 gal Drum

  • Shipping: Ships UPS Air , UPS Ground or LTL Truck

RUST INHIBITOR INJECTOR PUMP SYSTEM:

The Rust Inhibitor Injection Pump for using Power Kleen RI is available on all MART Power Washers. This system is easily added to any MART Washer in the field.

Part Rust Inhibitor Injector PumpPower-Kleen RI Injector Pump

 

 

 

 

 

 

 

Power-Kleen RI PDF

Power Kleen Rust Inhibitor Printer Version PDF

 

Back to Top

 



Home | Product Registration | Site Map
Spare/Repair Parts | Maintenance | Chemicals | Training | Titration | Rebuilds/Retrofits
Training/Startup | Support | FAQ | Warranty Service | Contact Us | Location | Feedback

 

Mart Tech Services
2450 Adie Road, Suite 100
Maryland Heights, MO 63043

Phone: (314) 567-3705
Fax: (314) 567-6318
Toll Free: (800) 543-6278
Email: marct@martwash.com