Parts Washer Chemicals - Specification Sheets - Power Kleen I Detergent



Power Kleen I Logo

Heavy-Duty, Low Foaming Detergent for Iron and Steel

 GENERAL DESCRIPTION

Power-Kleen I is a 100% active concentrated parts washer cleaner designed specifically for high pressure & temperature spray washing of iron & steel. The powerful cleaning action becomes more effective at higher temperatures Power Kleen I is an aggressive detergent that tackles the toughest soils on iron & steel.

 ADVANTAGES

Parts Cleaning

 

 

 

Power Kleen I

BEFORE

AFTER

 

 

 

 

 

 






  • Maximum strength, advanced cleaning detergent for removing oil deposits, heavy greases, scale, rust, paint, carbon based soils, engine varnish and other soils

  • 100% Active Concentrated chemical with no fillers

  • Unsurpassed Cleaning Power for Iron & Steel

  • Activated rust inhibitors protect your washer & unrinsed parts

  • Built-in defoamant reduces the need for additional anti-foam products.       

 APPLICATION GUIDELINES

Power-Kleen I is designed for use at low concentrations:

  • Washing light soils                       3.0 oz/gal to   5.0 oz/gal
  • Washing heavier soils                 6.0 oz/gal to 10.0 oz/gal
  • Paint and Rust Removal            10.0 oz/gal to 12.0 oz/gal
  • Useable temperature range 150° - 210º. Higher temperatures increase effectiveness.

PHYSICAL PROPERTIES (TYPICAL DATA)           

Form.............................................................Powder          pH range of Working Solution.........................13-14
Color (concentrate) .................................Off White         pH of concentrate....................................................14
Base..........................................Sodium Hydroxide

MIXING INSTRUCTIONS

For StingRay / MART Parts Washers: Heat the water to at least 160ºF. Open and secure the Power Washer door. Carefully distribute ½ to 8 oz of detergent per gallon of water on the drip pan beneath the turntable in the washer. Close the washer door and start the pump to dissolve the detergent.

For all other cleaning equipment:
Add chemical carefully and as instructed by the machine manufacturer. Avoid “dumping” of chemical directly into washer reservoir. Violent exothermic (heat released) reactions, splashing of heated chemical solutions and the premature release of fumes may occur. If chemical must be added to the solution, slowly pour chemical into solution while continuously mixing.

HEALTH AND SAFETY

Avoid contact with chemical and solution. Avoid inhaling dust and fumes. Wear eye protection and gloves when handling chemicals. Instructions can also be found on the Power-Kleen I label, StingRay Tech Services Website or reference the StingRAy / MART Parts Washer Operating Manual.
Get the most recent Power-Kleen I PDFPower-Kleen I SDS

 PACKAGING

Part Number

Package Size

52783

50 lb Pail

52784

500 lb Drum

Shipping: LTL Freight Carrier

Power-Kleen Tiration Test Guide Power-Kleen I Technical Data Sheet

SOLUTION MONITORING

Power-Kleen Tiration Test Guide

Power-Kleen Titration Test Guide

   
Recommeded initial Chemical Charge

Recommended initial Chemical Charge for Power Washer

 

Chemical Concentration Calculator

 

Power-Kleen I PDF

Power Kleen I Printer Version PDF

 

 

 

Power-Kleen Additional Related ChemicalsAdditional Related Chemicals


Power-Kleen Defoamant Power Kleen Defoamant "A"

Power-Kleen Rust Inhibitor Power Kleen Rust Inhibitor

Power-Kleen Titration Test Kit Power Kleen Titration Test Kit

 

Back to Top



Home | Product Registration | Site Map
Spare/Repair Parts | Maintenance | Chemicals | Training | Titration | Rebuilds/Retrofits
Training/Startup | Support | FAQ | Warranty Service | Contact Us | Location | Feedback

 

Mart Tech Services
2450 Adie Road, Suite 100
Maryland Heights, MO 63043

Phone: (314) 567-3705
Fax: (314) 567-6318
Toll Free: (800) 543-6278
Email: marct@martwash.com